Noico 50 mil 50 sqft Car Sound Deadening Mat Sound Deadener Insulation Material Noico 50 mil Sound deadener mat 50 sqft
Характеристики
Car Sound Deadening Shop
Noico 50 Mil 50 Sqft Car Sound Deadening
- Brand: Noico
- Part Number: NoicoSM3
- Type: Butylbased with AluFoil
- Exterior: Foil with Noico logo
- Thickness: 50 mil=0.05 inch
- Total coverage: 50 sqft
- Number of sheets: 12 folded
- Sheet size: 29.5 x 20.5 inch
Features:
Best price comparing to other brands
Base material with an optimal performance to price value!
Now everyone can easily eliminate the annoying road noise in the vehicle. We've designed the product that pretty efficiently handles the rattle and reduces noise while being affordable to almost everyone. NOICO would deaden the entire car for the same money that would be enough to only insulate the doors using the expensive brands material.
Material effectively deadens the background noise
Automotive self-adhesive insulation consists of butyl. NOICO sound deadening has a total weight of 0.5 lbs/1sqft. This weight ensures optimum efficiency and sound insulation that could be possibly gained from 50 mil thickness material. NOICO 50 mil is full weighted sound deadening material!
Easy, hassle free installation
Audio insulation NOICO has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
Recommended products
Recommended products
Quantity of material needed per vehicle class ( in sqft )
Quantity of material needed per vehicle class ( in sqft )
Model of a car | Firewall + Floor | 4 Doors | Roof | Trunk | Total |
---|---|---|---|---|---|
Subcompact B | 26 | 26 | 13 | 24 | 89 |
Compact C | 28 | 28 | 16 | 26 | 98 |
Mid-size D | 30 | 30 | 16 | 28 | 104 |
Full-size E-F | 32 | 30 | 17 | 31 | 110 |
Compact SUV | 32 | 32 | 20 | 32 | 116 |
Mid-size SUV | 32 | 32 | 27 | 35 | 126 |
Full-size SUV | 37 | 34 | 32 | 34 | 137 |
Full-size Pickup | 28 | 34 | 15 | 0 | 77 |
Disclaimer: This calculation is an approximate estimate and might contain some deviations. Please refer to your vehicle instruction guideline for more accurate dimensions.
How to install
How to install
Please read the instruction carefully up to the end! This is really important as the efficiency of soundproofing doesn't only depend on the material you use but largely on the installation sequence as well. Please note that incorrect installation of a sound deadening material might lead to undesirable results or no results at all.
1 step
Decide what part of the car you want to insulate first: roof, floor, doors or a hood. The insulation of each parts of the vehicle has its own result and contribution to overall outcome. That’s why we recommend you to soundproof all parts of the car for the maximum soundproofing output. Locate the guideline instruction to your car on the internet and carefully read as to how to dismantle a certain panels. Be careful when you take off plastic trim parts to avoid breaking the fixings! Very detailed information can be found on automotive forums. However, If you have any questions, you can email us and we reply you back with a detailed response within 1-2 working days.
2 step
Remove the remains of the factory insulation once you have dismantled the interior ( you need to do that if the factory sound insulation is damaged or not properly fixed). You can leave it there if it’s still in a good shape. Properly clean and degrease the surface prior to installation of deadener. It has to be dry and clean! It won’t be properly fixed and may not last long if you apply the material on a wet or dirty surface. Use a degreaser and dry clean rag for the Step 4. We also recommend wearing gloves and air the room from time to time while doing it. * Pre-try the degreaser on a small spot before using that on a painted or plastic exterior.
3 step
Measure the pre-cleaned surface of the prospective spot that you are going to treat. We recommend you first make a pattern of an appropriate size on paper and then transfer that to the insulation sheet. This will help you to place everything accurately and avoid wasting the material. Use a stationery knife or construction scissors to trim the desired piece of insulation sheet. Be careful and use gloves for your hand protection.
4 step
Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper. Make sure that the material covers it. Now it’s time to remove the release paper. Please do not remove it at once. You need to do it gradually for a better adhesion. Now when your sheet is ready to be used, lay that down to the surface and let it glue. Properly flatten the sheet with hands to avoid air bubbles between the metal and insulation material. Use a roller for rolling down the foil as a next step. You can find a special pattern on the foil that helps to see if it's rolled down properly. You have to roll down the foil till it is plain and smooth, and you cannot see the convex foil texture.
It is important!
- Auto sound deadener NOICO
- Stationery knife or construction scissors
- A roller for rolling out sound deadening material
- Gloves
- Degreaser
- A cloth for wiping
- A pen for marking
- Material for inside use only
- The allowed temperature is from -49F to 212F
- Don’t use the material in high temperature parts of the car such as exhaust pipe
- The material cannot be reused after dismantled
- The material can be used only on clean dry metal surfaces
- Please observe safety precautions