Clear Bar Table Top Epoxy Resin Coating Wood Tabletop - 2 Gallon Kit Unbranded/Generic ER2GK

Clear Bar Table Top Epoxy Resin Coating Wood Tabletop - 2 Gallon Kit Unbranded/Generic ER2GK
Clear Bar Table Top Epoxy Resin Coating Wood Tabletop - 2 Gallon Kit Unbranded/Generic ER2GK - фотография #2
Бренд: Unbranded/Generic
Размер: 2 Gallon
~ 8 027 ₽ 87.00 $

Характеристики

Band Material Resin
Handle Material Wood
Band Color Clear
Materials Resin
Featured Refinements Epoxy Resin
Main Stone Treatment Coating
Material Epoxy
Country/Region of Manufacture United States
Finish Clear

CLEAR EPOXY RESIN

Low viscosity, convenient 1:1 mix ratio by volume, room temperature curing system with great clarity and a high gloss finish.

This resin cures very hard and has very nice air release.  Excellent chemical and water resistance(s), coupled with superb mechanical properties, make this resin a candidate for all applications. 

Perfect for tabletopsfiberglass worksmall castings (under 1"), electrical pottingjewelry makingconcrete - pebble coatingmarine applicationsboat building, & wood water proofing - repairs.     

NOTICE:  THIS PRODUCT IS SOLD BY WEIGHT - NOT BY VOLUME.  YOU WILL RECEIVE 16 POUNDS OF TOTAL RAW MATERIAL.  THE RESIN, NOR THE HARDENER IS FILLED TO THE TOP OF THE BOTTLES. :-)   

Typical Properties:

  • Mix Ratio.......................................1:1 by volume
  • Pot-Life .........................................30-45 minutes (100gram mass)
  • Hardness.......................................D78
  • Mixed Viscosity............................1100cps.
  • Tensile Strength, psi....................7,500
  • Compressive Strength, psi.........18,500
  • Linear Shrinkage, in/in.................0008
  • Chemical Resistance....................excellent
  • Moisture Resistance.....................excellent
  • Dielectric Strength, (volt/mil).......450
  • Dielectric Constant, 1mhz............3.2
  • Product weight..............................15.5 (mixed) pounds
  • Cure Speed 

    This product provides fast cure and property development at ambient and low temperatures without accelerators and allows for quick return to service.  Typical pot-life on this item is roughly 30-50 minutes based on mass and temperature.  Thin film set time (3mil. film) is roughly 5 hours at 78F.  Fast cure and green time while exhibiting low exothermic temperatures (120C.) makes this product ideal for all applications.  Full cure is 24 hours at normal conditions.

    This product cures to a brilliant high gloss finish.  The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass. 

    Mixing, Storage, and Application

    Mix this resin 1:1 by volume.  If mixing by weight, mix 100 parts of resin into 83 parts of hardener.  When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of mixing container.  Improperly mixed epoxy can create a major headache.  Remember that thermoset plastics are temperature sensitive.  Cold weather slows the cure process down, whereas heat speeds curing up.  Always try to mix chemicals at room temperature.  For best results, try pouring epoxy into hardener.  Pour along the side of the container to help alleviate air entrapment.  Mix for at least 3-5 minutes in a in a round motion until chemical are clear and free of striations.  Allow the mixed components to stand in your mixed cup for at least 5 minutes.  This allows for bubbles to rise to the surface.  Small castings and potting units may take longer to cure than larger items.    

    This chemical needs to be stored in a dry, safe, temperature controlled environment.  Always keep the lids tightly sealed when not in use.  Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener.  Moisture is also a potential issue.  Always keep the bottles sealed when not in use.  

    When applying this product, use gloves, goggles, and proper safety equipment.  Please refer to the safety data sheet before using any of our epoxy products.


    SHIPPING: Our warehouse ships items within 1 business day.  We ship FedEx and will forward all tracking information once your item has shipped.  Please be advised that our normal business hours are Monday to Friday.  FedEx usually has 5 day transit if not in a rural area.  All together, it should take about 5-6 days to arrive.  

    RETURNS: Our goal is to provide quality products and keep our customers happy.  If you are not satisfied with your purchase, we will issue you a full refund. We do ask that the buyer pays for return shipping.