Magnum Energy PT-100 100A MPPT Solar Charge Controller Made in USA Magnum PT-100

Magnum Energy PT-100 100A MPPT Solar Charge Controller Made in USA Magnum PT-100
Magnum Energy PT-100 100A MPPT Solar Charge Controller Made in USA Magnum PT-100 - фотография #2
Magnum Energy PT-100 100A MPPT Solar Charge Controller Made in USA Magnum PT-100 - фотография #3
Magnum Energy PT-100 100A MPPT Solar Charge Controller Made in USA Magnum PT-100 - фотография #4
Magnum Energy PT-100 100A MPPT Solar Charge Controller Made in USA Magnum PT-100 - фотография #5
Бренд: Magnum
~ 105 979 ₽ 1 144.60 $

Характеристики

Magnum Energy PT-100 100A MPPT Solar Charge Controller Made in USA
Magnum Energy
100A MPPT Solar Charge Controller
PT-100

The PT-100 from Magnum Energy is the 1st 100A Maximum Power Point Tracker (MPPT) solar charge controller on the market! Designed to harvest the maximum available energy from the PV array, you can put your entire solar array (up to 6600W) on this one charge controller, without experiencing significant losses. The PT-100’s MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current and battery voltage to fully charge the battery. Ideal for off-grid or back-up power applications. The PT-100 controllers are proudly assembled and tested in the United States at Magnum's facility in Everett, Washington.

FEATURES:

  • Maximum Power Point Tracking (MPPT) technology for increased PV power output efficiency
  • Multi-state Charging for maximizes system performance and improves battery life
  • Optimal Battery Charging using an included external temperature sensor for optimum battery charging, even during extreme temperature changes
  • Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage
  • GFDI: Integrated PV Ground-Fault Detection and Interruption/Indication, with pre-fault leakage/diagnostic metering
  • AFCI: An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC) Article 690.11 requirements
  • Extensive Electronic Protection: Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection
  • Supports large PV arrays - a single controller supports a large PV array up to 6600W
  • High Efficiency - provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode
  • Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information
  • Convenient Installation - Run all of the wiring to the unique, remain-in-place wiring box with ease prior to installing the full PT-100 unit
  • On-site Updates - The PT-100’s software can be updated on site
  • Easy MP and MMP integration - The PT-100 is designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers
  • Optional ME-ARC50 Remote works with internal data-logging functionality that keeps energy harvest information and battery Ah/Wh data for up to 255 days. It is the only remote, currently, that works with the PT-100 menus.
  • Included in box: PT-100 Charge Controller, 15' BTS (Battery Temp Sensor), 6' Network Communication Cable (300V), 6' Extension Cable (300V), Back mount bracket (2 pieces) with 4 screws, Ground Fault Warning label, PT-100 Owners Manual

    PV Input Voltage Paramenters for the PT-100: (**CAUTION: Ensure the array’s Voc is kept below the Max PV Input Voltage level under any condition. Voltage above this level has a high probably of causing damage to the PT-100).

    Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
    Hurricane Wind Power
    2019
    Corporate America Today
    2019 Best Off-Grid 
    Renewable Energy 
    Product Supplier - USA
    UP TO 50% DISCOUNTS
    TOP BRANDS
    Payment
    Shipping
    Returns

     

    We accept payment by any of the following methods:

     

    PayPal

     

    Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!


    We offer Fast shipping on all orders!


    Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).


    In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

     

    If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.

     

    You can return a product for up to 14 days from the date you purchased it.

    Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

    See our other items

    Thank you for visiting our Ebay store!
    Magnum Energy 100A MPPT Solar Charge Controller PT-100 The PT-100 from Magnum Energy is the 1st 100A Maximum Power Point Tracker (MPPT) solar charge controller on the market! Designed to harvest the maximum available energy from the PV array, you can put your entire solar array (up to 6600W) on this one charge controller, without experiencing significant losses. The PT-100&rsquo;s MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current and battery voltage to fully charge the battery. Ideal for off-grid or back-up power applications. The PT-100 controllers are proudly assembled and tested in the United States at Magnum's facility in Everett, Washington. FEATURES: <li> Maximum Power Point Tracking (MPPT) technology for increased PV power output efficiency</li> <li>Multi-state Charging for maximizes system performance and improves battery life</li> <li> Optimal Battery Charging using an included external temperature sensor for optimum battery charging, even during extreme temperature changes</li> <li> Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage</li> <li> GFDI: Integrated PV Ground-Fault Detection and Interruption/Indication, with pre-fault leakage/diagnostic metering</li> <li>AFCI: An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC) Article 690.11 requirements </li> <li> Extensive Electronic Protection: Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection</li> <li>Supports large PV arrays - a single controller supports a large PV array up to 6600W </li> <li>High Efficiency - provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode </li> <li> Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information </li> <li>Convenient Installation - Run all of the wiring to the unique, remain-in-place wiring box with ease prior to installing the full PT-100 unit </li> <li>On-site Updates - The PT-100&rsquo;s software can be updated on site</li> <li>Easy MP and MMP integration - The PT-100 is designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers </li> <li>Optional ME-ARC50 Remote works with internal data-logging functionality that keeps energy harvest information and battery Ah/Wh data for up to 255 days. It is the only remote, currently, that works with the PT-100 menus. </li> Included in box: PT-100 Charge Controller, 15' BTS (Battery Temp Sensor), 6' Network Communication Cable (300V), 6' Extension Cable (300V), Back mount bracket (2 pieces) with 4 screws, Ground Fault Warning label, PT-100 Owners Manual PV Input Voltage Paramenters for the PT-100: (**CAUTION: Ensure the array&rsquo;s Voc is kept below the Max PV Input Voltage level under any condition. Voltage above this level has a high probably of causing damage to the PT-100). [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&amp;tid=1) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
    Magnum Energy PT-100 100A MPPT Solar Charge Controller Made in USA
    Magnum Energy
    100A MPPT Solar Charge Controller
    PT-100

    The PT-100 from Magnum Energy is the 1st 100A Maximum Power Point Tracker (MPPT) solar charge controller on the market! Designed to harvest the maximum available energy from the PV array, you can put your entire solar array (up to 6600W) on this one charge controller, without experiencing significant losses. The PT-100’s MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current and battery voltage to fully charge the battery. Ideal for off-grid or back-up power applications. The PT-100 controllers are proudly assembled and tested in the United States at Magnum's facility in Everett, Washington.

    FEATURES:

  • Maximum Power Point Tracking (MPPT) technology for increased PV power output efficiency
  • Multi-state Charging for maximizes system performance and improves battery life
  • Optimal Battery Charging using an included external temperature sensor for optimum battery charging, even during extreme temperature changes
  • Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage
  • GFDI: Integrated PV Ground-Fault Detection and Interruption/Indication, with pre-fault leakage/diagnostic metering
  • AFCI: An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC) Article 690.11 requirements
  • Extensive Electronic Protection: Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection
  • Supports large PV arrays - a single controller supports a large PV array up to 6600W
  • High Efficiency - provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode
  • Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information
  • Convenient Installation - Run all of the wiring to the unique, remain-in-place wiring box with ease prior to installing the full PT-100 unit
  • On-site Updates - The PT-100’s software can be updated on site
  • Easy MP and MMP integration - The PT-100 is designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers
  • Optional ME-ARC50 Remote works with internal data-logging functionality that keeps energy harvest information and battery Ah/Wh data for up to 255 days. It is the only remote, currently, that works with the PT-100 menus.
  • Included in box: PT-100 Charge Controller, 15' BTS (Battery Temp Sensor), 6' Network Communication Cable (300V), 6' Extension Cable (300V), Back mount bracket (2 pieces) with 4 screws, Ground Fault Warning label, PT-100 Owners Manual

    PV Input Voltage Paramenters for the PT-100: (**CAUTION: Ensure the array’s Voc is kept below the Max PV Input Voltage level under any condition. Voltage above this level has a high probably of causing damage to the PT-100).

    Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
    Hurricane Wind Power
    2019
    Corporate America Today
    2019 Best Off-Grid 
    Renewable Energy 
    Product Supplier - USA
    UP TO 50% DISCOUNTS
    TOP BRANDS

    See our other items

     

    We accept payment by any of the following methods:

     

    PayPal

     

    Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!


    We offer Fast shipping on all orders!


    Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).


    In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

     

    If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.

     

    You can return a product for up to 14 days from the date you purchased it.

    Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

    Thank you for visiting our Ebay store!