Focusrite Saffire Pro 40 Firewire Interface BRAND NEW Focusrite AMSSAFFIREPRO40IO

Focusrite Saffire Pro 40 Firewire Interface BRAND NEW Focusrite AMSSAFFIREPRO40IO
Focusrite Saffire Pro 40 Firewire Interface BRAND NEW Focusrite AMSSAFFIREPRO40IO - фотография #2
Focusrite Saffire Pro 40 Firewire Interface BRAND NEW Focusrite AMSSAFFIREPRO40IO - фотография #3
Focusrite Saffire Pro 40 Firewire Interface BRAND NEW Focusrite AMSSAFFIREPRO40IO - фотография #4
Focusrite Saffire Pro 40 Firewire Interface BRAND NEW Focusrite AMSSAFFIREPRO40IO - фотография #5
Бренд: Focusrite
~ 22 221 ₽ 239.99 $

Характеристики

UPC 00815301008057
Additional Inputs/Outputs MIDI I/O
Inputs/Outputs ADAT In
Max. Number of Channels 8
Max. Sampling Rate 24 Bit (96kHz)
Media Type ADAT
Mic/Line Input Line XLR
Type FireWire Audio Interface, MIDI Interface
Form Factor Rack Mountable
Interface Type MIDI Interface
ProAudioStar

Authorized Dealer - Full Warranty

Focusrite Saffire Pro 40 Firewire Interface

Professional 20 In / 20 Out Firewire interface with eight Focusrite Pre-amps

- Brand New -

Description

Focusrite’s Saffire range of Firewire audio interfaces highlights the fundamental features that distinguish the sound quality of Focusrite interfaces from other available products in their class: precision analogue/digital conversion quality, a result of careful circuit design, multi-layer board layout and component choices, and Focusrite’s award-winning mic preamps, developed from 30 years of experience in mic pre design and created especially for our interfaces to deliver clean, transparent sound with minimal noise and distortion. Click here to learn more about the keys to Focusrite interface superiority. Saffire interfaces offer the most effective way to get high-quality audio into and out of your DAW. They’re compatible with any DAW on Macintosh or Windows, and with the included Red 2 and Red 3 AAX plugins, make a perfect partner for Pro Tools.

20-in, 20 out Firewire interface with eight Focusrite mic pres

Designed with the sophisticated project studio owner or smaller commercial facility in mind, Saffire PRO 40 features a versatile 20 inputs and 20 outputs, including a complement of eight Focusrite mic preamps guaranteed to get the best out of any microphone, with minimal noise and distortion even at high gain. Two mic/line/instrument inputs are accessed via the front panel, which also provides two independent headphone monitor outputs.

30-year heritage of acclaimed mic pre design

Focusrite’s unparalleled preamp legacy forms the foundation of this versatile interface, with eight award-winning Focusrite preamps. Focusrite came into being thirty years ago in 1985 when console design legend Rupert Neve was asked by Sir George Martin to develop new mic pres for the consoles at AIR studios. The resulting, sought-after sound has been the basis of Focusrite mic preamps ever since. Those used in our computer interface ranges are a special 2-stage design created specially for the purpose, combining low noise, high gain and exceptional headroom, allowing you to get the best out of any microphone.

Precision conversion in and out

Our acclaimed mic pres are combined with the very latest in interfacing technology, including precision digital conversion based on exceptional circuit design and multi-layer boards, offering the lowest possible latency. JetPLL™ jitter-reduction technology helps to attain the goal of pristine audio quality, coupled with excellent routing flexibility and future-proof, rock-solid stability. Meanwhile, powerful Saffire MixControl DSP-based zero-latency mixing software allows the maximum monitoring flexibility.

A host of I/O options

All eight main inputs feature combo XLR/TRS connectors and sense which is in use automatically. Inputs 1 and 2 appear on the front panel and support mic, line and instrument operation, while the remaining six are on the rear panel and offer mic and line input functionality. In addition to the comprehensive monitoring options described below, there are eight TRS line outputs. In addition, ADAT I/O, stereo S/PDIF I/O and two virtual ‘loopback’ inputs for routing digital audio between software applications are provided. Every mic pre features phantom power, with the first two channels also featuring -9dB pads for additional headroom. Front panel five-step LED metering for each analogue input offers accurate viewing of levels.

MixControl: zero-latency DSP-powered mixing software

Saffire MixControl, the ultra-low-latency 18 x 16 DSP Mixer/Router software provided with Saffire PRO 40, sets a new standard at this price point for audio interface control. It features unparalleled output routing and monitoring, as well as intuitive one-click options, a clear and concise mixing layout and large on-screen metering for inputs, outputs and submixes.

Maximum monitoring

Two independent headphone buses are provided, each with their own level controls available on the front panel. A dedicated stereo monitor mix TRS output features pads for improved sound quality when connected to active monitor speakers, while an 'anti-thump' circuit protects your monitor speakers from spikes when booting up or shutting down. Front panel controls include a main monitor dial with dim and mute switches, all of which fully integrate with customisable software to cover every possible monitoring need, providing a set of controls for any set-up from basic stereo to full 7.1 surround.

Features/Specs

Eight high-quality award-winning Focusrite preamps

  • The best sounding interface in its class. Focusrite's unparalleled preamp legacy forms the foundation of this new interface, with eight award-winning Focusrite preamps.

High-quality 24-bit/96kHz FireWire interface

  • Features high quality A-D / D-A conversion and JetPLL jitter reduction technology; pristine audio quality and reliable synchronisation are guaranteed.

Total I/O count of 20 inputs and 20 outputs

  • A host of I/O options are provided*, including a unique 'loopback' facility for routing audio between software applications via Saffire MixControl.

The Focusrite Plug-in Suite

  • Upgrade your standard sequencer effects and bring a touch of class to your session with all-new Focusrite Compression, Reverb, Gating and EQ VST/AU plug-ins.

Two separate headphone buses

  • Two artists can receive independent and fully customised monitor mixes. Each output has an independent level control available on the front panel.

Saffire MixControl ultra-low-latency DSP mixer/router

  • Routing flexibility and intuitive one-click set-up solutions; Saffire MixControl provides an 18 x 16 DSP mixer with excellent output routing and monitoring capabilities.

Unmatched routing flexibility

  • Saffire PRO 40 is the most flexible interface in its class, able to adapt to any recording session quickly and intuitively. The user is able to route any input signal or DAW output, or a mix of both, to any of the 20 outputs.

 

Microphone Inputs

  • Dynamic Range (A-Weighted) : 109dB
  • SNR (A-weighted) : -109dB
  • Frequency Response : 20Hz - 20kHz +/- 0.1 dB
  • THD+N : 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)
  • Noise : EIN > 125dB (128dB analogue to digital) (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)
  • Maximum level (A-weighted) : 8dBu at 1%

Line Inputs                                                          

  • Dynamic Range (A-Weighted) : 109dB
  • SNR (A-weighted) : -109dB
  • Frequency Response : 20Hz - 20kHz +/- 0.1dB
  • THD+N : < 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)
  • Noise : -90dBu (22Hz/22kHz bandpass filter)
  • Maximum level (A-weighted) : 28.5dBu at 1%

Instrument Inputs

  • Frequency Response 20Hz-20KHz +/- 0.1dB
  • Maximum Input Level min gain no pad +8dBu
  • Maximum Input Level max gain no pad -42dBu
  • THD+N, -1dBFS, min gain, no pad < 0.0015%
  • SNR 109dB "A"                                                                                                          
  • DNR 109dB "A"
  • Input Impedance > 1MOhm
  • X-talk < -100dB
  • Adjustable Gain > 50dB
  • Pad Attenuation 10dB

Headphone Outputs

  • Frequency Response 20Hz-20KHz +/- 0.1dB
  • SNR 109dB "A"
  • DNR 109dB "A"
  • Maximum Output into 32R +12.4dBu (+10.2dBV)
  • Power into 32R 250mW
  • Output Impedance < 7Ohms
  • Load Impedance > 24Ohms

Line level Outputs

  • Dynamic Range (A-Weighted) : 108dB
  • SNR (A-weighted) : -108dB
  • THD+N : < 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)
  • Maximum level (A-weighted) : 15.7dBu at 0.883%

Additional Conversion Performance

  • Clock jitter < 250 picoseconds
  • THD+N AMPL (A-weighted)= -109dBFS

CONNECTIVITY        

Analogue Channel Inputs (Inputs 1-8)

  • 2 Mic/Line/Inst Combo XLR (Inputs 1 and 2)
  • 6 Mic/Line Combo XLR (Inputs 3-8)
  • Automatic switching of Mic / Line (e.g. inserting a jack switches from Mic to either Line or Instrument)

Digital Channel Inputs (Inputs 9-18) 44.1-96kHz

  • Stereo S/PDIF input on RCA
  • 8 ADAT inputs on Optical Connector, reduces to 4 inputs at 88.2/96kHz • Optical input can be switched to S/PDIF 3/4 in software preferences (Both ADATs and S/PDIF over RCA input disabled)

Analogue Audio Outputs (Outputs 1-10)            

  • 8 ¼” TRS Jack (Outputs 3-10)
  • 2 monitor mix outputs on ¼” TRS Jack (Outputs 1 and 2)
  • Stereo headphones mix 1 on ¼” TRS (also routed to outputs 7 & 8)
  • Stereo Headphones mix 2 on ¼” TRS (also routed to outputs 9 & 10)

Digital Channel Outputs (Outputs 11-20) 44.1-96kHz

  • Stereo S/PDIF output on RCA
  • 8 ADAT outputs on Optical Connector, reduces to 4 outputs at 88.2/96kHz
  • Optical output can be switched to S/PDIF 3/4 in software preferences (ADATs disabled)

Other I/O                      

  • 2 6-pin FireWire sockets
  • 2 Standard 5-pin DIN MIDI connectors: In and Out
  • IEC mains power input connector

Weight and Dims

  • 482mm / 19" (W) x 45mm / 1.8" (H) x 265mm /10.4" (D)

Compatibility

  • Saffire Pro 40 is compatible with OS X 10.10 and above, and Windows 7 and above







We are authorized dealers for all these brands. Click a logo to see our listings.

We collect NYS Sales Tax for items shipping within New York. Local duties, taxes and fees out of the USA are not included in the sale price or ship charge. Proaudiostar is not responsible for any taxes outside of NY and or the USA.

If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost.

Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES.

We provide free shipping via UPS Ground to the contiguous 48 United States, on most items.

Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. Local duties, taxes and charges are not included in the sale price or ship charges. ProAudioStar is not responsible for any taxes outside of NY and or the USA. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost.

We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid UPS to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit.

We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service.

Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order.

Please contact us for a Return Authorization before returning any items.