10pcs DMX512 2.4G DJ Party Wireless Lighting Controller Transmitter 8x Receiver Unbranded/Generic Does not apply

10pcs DMX512 2.4G DJ Party Wireless Lighting Controller Transmitter 8x Receiver Unbranded/Generic Does not apply
Бренд: Unbranded/Generic
~ 13 702 ₽ 147.99 $

Характеристики

ISBN Does not apply
Do you like holding party but is annoyed by winding wire? This wireless transmitter and the receivers will help you to get rid of the trouble. Just plug the transmitter into stage lamp console, plug the receivers into stage lamp and you will be free to control stage lamp without wire.

Features:
Pluged in stage lamp console, the transmitter transmits DMX512 protocol data in wireless way.
Pluged in stage lamp, the receivers receive DMX512 protocol data in wireless way.
No time delay, signal data is stable and timely.
This product adopts a 2.4G ISM frequency section.
High effective GFSK modulate, communication design; 126 channels jumping frequency automatically, high anti-jamming ability.
126 channels jumping frequency automatically, high anti-jamming ability, to ensure works reliability.
7 groups ID code settable, User can use 7 groups individual wireless net without any interfere each other in the same place. ( Tricolor LED displaying Indicators )

Specifications:
2.4G Wireless DMX512 R/T
Input Voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max Transmitting Power Rate: 20dBm
DMX Connector: 3pin male (transmitter), 3pin female (receivers)
Communication Distance: 400M ( visible distance )
Work Frequency Section: 2.4G ISM, 126 channels. frequency section
Plug Standard: US / EU  ( optional )
Material: zinc alloy + plastic
Transmitter Size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H )
Receiver Size: 8 * 2.5 * 2.5cm/3.14 * 0.98 * 0.98in ( L * W * H )
Transmitter Weight: 67g / 2.4oz
Receiver Weight: 45g/1.59oz
Package Size: 21 * 19 * 18cm/ 8.3 * 7.5 * 7.1in ( L * W * H )
Package Weight: 1960g / 4.3 lb

Operating manual:
ID code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1). Press momentary switch above the side led indicator to indicate ID setting.
2). Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color IDcode.
3). Working condition:
LED constant lit up: No DMX or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiving
4) RF frequency 2.400 - 2.525G, total 126 channels, it’s searching automatically.
5). ID Code “1-7” groups ID code, press ‘KEY’ for setting, it only can work under same ID code of transmitter and receivers. ( Same LED Color )

Establishing Communication:
1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receivers change communicated frequency section. Green LED flashes until received  same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.

Package list: C-L0072US
2 * DMX Wireless Transmitter
8 * DMX Wireless Receiver
10 * Adapter
10 * User Manual ( English )
DataCaciques