Siser EasyWeed® HTV Heat Transfer Vinyl for T-Shirts 15" by 12" Sheet(s) Siser Siser EasyWeed Sheets
Характеристики
We are an Authorized Siser Distributor! Buy with Confidence!
Siser EasyWeed® Heat Transfer Vinyl
15" by 12" Sheet(s)
We ship in sturdy cardboard tube or mailer for a secure, wrinkle and crease free delivery - Free & Fast!
Looking for EasyWeed Rolls?
Click here
Looking for Siser Glitter HTV?
Click here
Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed
applies at a lower temperature than competitor material, backing can be
peeled hot or cold and doesn’t lift during weeding. It’s also
extremely durable wash after wash and uses a lower pressure setting for
application. EasyWeed is thinner than others on the market and offers a one-second tack application that’s great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser cutting systems. Approximate width is 14.75".
Application instructions (home iron)
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
Application Instructions (heat press)
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
EasyWeed Applies to:
- 100% cotton
- Poly/cotton blends, Leather
- 100% polyester
Laundering:
- Wait 24 hours before 1st wash
- Turn item inside out
- Machine wash warm or cold / mild detergent
- Dry on normal dryer setting
- Do not dry clean
Cricut®:
Blade: Standard | Silhouette Cameo:
Blade: Standard, 3 | Scan N Cut:
Blade: 2 | Roland GS/GX-24:
Blade: 45° | Graphtec:
Blade: 45° |